Victron Energy

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== my-PV AC-Thor and Victron Energy Off-Grid ======

For an Off-Grid system. when the batteries are full and we still have AC coupled PV power available, that power is lost. We could use that power and send it to a boiler or something similar. For this we are using a device from my-PV called AC-Thor.

The schematic for this kind of system looks like this (the meter from my-PV is not needed in this setup): 

{{::offgrid_-_acthor_integration_for_lucian.png?nolink|}}

First setup: 

AC-Thor device must be connected on the AC output of the Multi/Quattro just like the AC coupled PV inverter. 


Using the device touch screen, select Information menu and go to the third screen to find the current IP address.
 
{{:ac_thor_ip_address.jpg?nolink|}}

Open a browser, put that IP address into the address field and press enter 

The webpage should look like this: 

{{::ac_thor_main_page.jpg?nolink|}}

Please check the firmware version on AC-Thor device, must be at least a0010006. 
Go to setting and select the “Mode”. For ESS select ”Hot water 3KW”, for off-grid systems, select  “Frequency-Mode”. 

{{::ac_thor_frequency.jpg?nolink&800|}}

Go to Frequency-Modus and define Frequency start value 50.1Hz and the Frequency end value 51Hz.

{{::ac_thor_frequency_values.jpg?nolink&800|}}

On the Multiplus or Quattro, using Ve.config, add the PV Inverter support Assistant.

-> The correct working of the frequency shift in the PV Inverter assistant needs to physically have a PV inverter installed on ACout which can feed into the Victron system.