battery_compatibility:axistorage
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
battery_compatibility:axistorage [2019-01-22 10:16] – external edit 127.0.0.1 | battery_compatibility:axistorage [2019-08-15 12:18] (current) – replace venus-device with GX device guy_stewart | ||
---|---|---|---|
Line 7: | Line 7: | ||
==== 1. Introduction ==== | ==== 1. Introduction ==== | ||
=== 1.1 Compatible Victron products === | === 1.1 Compatible Victron products === | ||
- | All 48V Multis and Quattros. A [[venus-os: | + | All 48V Multis and Quattros. A [[venus-os: |
=== 1.2 Notes === | === 1.2 Notes === | ||
Line 21: | Line 21: | ||
{{ : | {{ : | ||
- | ==== 2. Venus-device needed ==== | + | ==== 2. GX device needed ==== |
To use the AXIstorage ESS in Victron system, it is necessary to use a ColorControlGX or a VenusGX. The controller takes care of sending the necessary canbus keep-a-live message to the ESS battery. Without it, the battery will open its internal emergency relay after 10 minutes. | To use the AXIstorage ESS in Victron system, it is necessary to use a ColorControlGX or a VenusGX. The controller takes care of sending the necessary canbus keep-a-live message to the ESS battery. Without it, the battery will open its internal emergency relay after 10 minutes. | ||
==== 3. Wiring of communication cables ==== | ==== 3. Wiring of communication cables ==== | ||
- | Use the //VE.Can to CAN-bus BMS type B Cable//, part number ASS030720018. Plug the side which is labeled Battery BMS into the AXIstorage BMS. Plug the side labeled Victron VE.Can into the [[venus-os: | + | Use the //VE.Can to CAN-bus BMS type B Cable//, part number ASS030720018. Plug the side which is labeled Battery BMS into the AXIstorage BMS. Plug the side labeled Victron VE.Can into the [[venus-os: |
- | Then, plug a [[https:// | + | Then, plug a [[https:// |
More information about the cable can be found in [[battery_compatibility: | More information about the cable can be found in [[battery_compatibility: | ||
- | Without properly connecting this cable, the battery will stop charging/ | + | Without properly connecting this cable, the battery will stop charging/ |
Line 62: | Line 62: | ||
- | ==== 5. Venus-device Configuration ==== | + | ==== 5. GX device Configuration ==== |
- | * Select the //CAN-bus BMS (500 kbits/s)// CAN-profile in the [[venus-os: | + | * Select the //CAN-bus BMS (500 kbits/s)// CAN-profile in the [[venus-os: |
* After properly wiring and setting up, the AXIstorage will be visible as a battery in the device list:{{ : | * After properly wiring and setting up, the AXIstorage will be visible as a battery in the device list:{{ : |
battery_compatibility/axistorage.1548148578.txt.gz · Last modified: 2019-01-22 10:16 by 127.0.0.1