Differences

This shows you the differences between two versions of the page.

--- ccgx:fischer_panda [2017-08-17 12:37] – mbosma
+++ ccgx:fischer_panda [2024-09-13 09:20] (current) – Removed and linked to its new home sloges
@@ Line 1: / Line 1: @@
-====== CCGX & Fischer Panda Gensets ======
+====== GX - Fischer Panda generators ======
-As of [[https://www.victronenergy.com/blog/2017/06/13/ccgx-v2-07-fischer-panda-ess-and-more/|CCGX v2.07]] it is possible to read data from your Fischer Panda generator. The generator needs to be connected to the VE.Can port of the CCGX, which requires a Fischer Panda SAE J1939 module.
+The old GX - Fischer Panda generators document has been removed and is now part of the GX device manual, which can be found here: [[https://www.victronenergy.com/media/pg/Cerbo_GX/en/connecting-supported-non-victron-products.html#UUID-4dadee56-232c-c5dd-1df6-5357b8ed4914 | Fischer Panda Generator Support]]
-===== Requirements =====
-  * CCGX or Venus GX
-  * Fischer Panda generator, xControl or iGenerator
-  * Fischer Panda SAE J1939 CAN module (part number 0006107)
-  * Fischer Panda FP-Bus to VE.Can adapter (part number 0023441)
-===== Connecting =====
-{{:ccgx:icontrol_connection.png?600|}}
-===== Menu =====
-Once all wiring and setup has been correctly done, the Fischer Panda shows up in the device list.
-===== Overview =====
-===== Generator start/stop =====
-It is possible to control a Fischer Panda generator with the auto generator start/stop function of the CCGX. See [[ccgx:generator_start_stop|here]] for a manual.