Differences

This shows you the differences between two versions of the page.

--- ccgx:fischer_panda [2018-03-21 11:31] – [CCGX & Fischer Panda generators] justin_tyers_live_a_c
+++ ccgx:fischer_panda [2024-09-13 09:20] (current) – Removed and linked to its new home sloges
@@ Line 1: / Line 1: @@
-====== CCGX & Fischer Panda generators ======
+====== GX - Fischer Panda generators ======
-Beginning with the release of [[https://www.victronenergy.com/blog/2017/06/13/ccgx-v2-07-fischer-panda-ess-and-more/|CCGX v2.07]] it became possible to read data from your Fischer Panda generator. The generator needs to be connected to the VE.Can port of the CCGX, which requires a Fischer Panda SAE J1939 module.
+The old GX - Fischer Panda generators document has been removed and is now part of the GX device manual, which can be found here: [[https://www.victronenergy.com/media/pg/Cerbo_GX/en/connecting-supported-non-victron-products.html#UUID-4dadee56-232c-c5dd-1df6-5357b8ed4914 | Fischer Panda Generator Support]]
-===== Requirements =====
-  * CCGX or Venus GX
-  * Fischer Panda generator, xControl or iGenerator
-  * Fischer Panda SAE J1939 CAN module (part number 0006107)
-  * Fischer Panda FP-Bus to VE.Can adapter (part number 0023441)
-Fischer Panda Firmware requirements:
-  * iControl (for the iGenerator): v2.17 minimum
-  * iControl panel: no minimum requirement
-  * xControl (for the constant speed generators): 4V38 minimum
-  * xContr panel: 4V29
-  * Fischer Panda SAE J1939 CAN module: 2V05
-  * Fischer Panda three phase module: 4V0b
-===== Connecting =====
-==== xControl ====
-The schematic below shows how to connect a Fischer Panda xControl generator.
-{{:ccgx:xcontrol_connection.png?650|}}
-==== iControl ====
-The schematic below shows how to connect a Fischer Panda iControl generator.
-{{:ccgx:icontrol_connection.png?650|}}
-===== Menu =====
-When all wiring is complete and the setup has been correctly carried-out, the Fischer Panda will show up in the device list:
-{{:ccgx:fischerpanda-devicelist_29648454.png?400|}}
-Entering the Fischer Panda device on the menu reveals a page like this:
-{{:ccgx:fischerpanda-menu_29648486.png?400|}}
-Notice that it features an on/off switch as well as displaying status information, and the main AC parameters: voltage, current and power.
-Engine temperature, RPM and additional information are all available by entering the //Engine// sub menu item.
-{{:ccgx:fischerpanda-enginemenu.png?400|}}
-===== Generator start/stop =====
-In addition to the manual start/stop and monitoring, there is also an automatic start/stop feature. This has the same comprehensive range of options as the Generator start/stop feature associated with the CCGX relay.
-See [[ccgx:generator_start_stop]] for the manual.
-{{:ccgx:fischerpanda-generatoroverview.png?400|}}
-===== Maintenance =====
-Whenever performing maintenance on the generator, be sure to //stop// the generator from the Fischer Panda control panel. This will disable the Fischer Panda autostart feature, and ensure that the generator cannot be remotely started - by a CCGX, for example.
-When the maintenance is completed, make sure you enable the autostart feature again. You can do this on the Fischer Panda control panel in the menu ''generator -> autostart -> turn on / off''.
-===== Troubleshooting =====
-=== I've set the mode of the genset to 'On' or 'Auto start/stop' but the generator is not starting/running. ===
-Make sure the Fischer Panda autostart feature is on, this allows the CCGX control the remote on/off of the genset. You can find this option on the control panel in the menu ''generator -> autostart -> turn on / off''.
-If you're manually trying to start the genset, a toast message appears with the text ''AutoStart functionality is currently disabled, enable it on the genset panel in order to start the genset from this menu''.
-{{:ccgx:fischerpanda-fpautostart_disabled2.png?400|}}
-If the generator auto start/stop is enabled, it will show error ''#1 Remote switch control disabled'' on the Auto start/stop page.
-{{:ccgx:fischerpanda-fpautostart_disabled.png?400|}}
-===== Disqus =====
-~~DISQUS~~