nction: configure that in the master of L1.
==== Assistants ====
Assistants can be used to expand the potential configuration options of your system, and are required in some installation types. When using assistants with multiple units, some assistants are required to be loaded onto all units in the system individually, and
re and make sure it has downloaded all the latest Assistants.
- re-configure the system
This error can als... ; replace the broken one.
- Update firmware and Assistants of the inverter/chargers. And of the GX Device. \... ts|Update the Inverter/charger firmware]] - (2) [[assistants:how_to_update_an_assistant|Update the Assistants]] - (3) [[ccgx:firmware_updating|Update the GX Device firmwa
n of the software VE.Configure.
- Go to the tab Assistants: \\ {{:ac_coupling:add_assistant.png?nolink&}}
- Add one of the Assistants that regulate output frequency:
- [[ess:des... inverters/grid codes.
More information on adding Assistants is [[assistants:how_to_add_and_configure_an_assistant|here]].
====== 2. GX Devices & Fronius PV Inverters
====== PV Inverter Support Assistant ======
{{:assistants:pvinvertersupport.png?direct&300 }}
(click for a re... ling:fronius|]]
* [[ccgx:ccgx_fronius|]]
* [[:assistants:three_phase_pv_inverter_assistant|Step by step gu
eeds to be xxxx159 or newer
* 2xx firmware (assistants gen1), needs to be xxxx209 or newer
* 3xx firmware (assistants gen2), needs to be xxxx306 or newer
* 4xx f
approximately 85 seconds per unit; and in case [[assistants:start|VEConfigure Assistants]] are used; ten it will take longer: writing an Assistants takes anything between a few and 40 seconds per un... guration. Some settings though, such as a changed Assistants configuration, will cause the inverter/charger to
y in the evening and night. Easy configuration in Assistants and on the GX device. For details refer to the [[... ation:
=== 3.6.2 Working with RAM IDs to address Assistants ===
Use RAM ID 128 and higher. Every RAM ID is a