This is an old revision of the document!
Table of Contents
EasySolar-II GX
Introduction
The Victron EasySolar-II GX integrates the following elements:
- A powerful Multiplus inverter/charger,
- A SmartSolar MPPT solar charge controller
- A simplified GX display and interface.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
The EasySolar-II still requires some knowledge and training in configuration.
The individual elements of this system also have their own respective documentation, and it should be referred to and understood before attempting installation.
Configuration
As the EasySolar is made of different elements, the configuration requires use of several configuration tools.
SmartSolar MPPT solar charge controller
The MPPT solar charge controller is programmable via the Victron Connect app via Bluetooth on Android, iPhone and Apple Mac computers. For full compatibility information with various platforms, please see https://www.victronenergy.com/live/victronconnect:start
Multiplus Inverter / Charger
Programming the Multiplus Inverter / Charger requires a MK3 USB dongle for offline local programming, or can be done via an internet connection with Remote VEConfigure https://www.victronenergy.com/live/vrm_portal:remote-veconfigure
Example wiring diagrams
Intelligent (CANBus) Battery System
ESS System
Default
Connections
Solar
Integrated 250/70 SmartSolar MPPT. PV Solar connections up to 250 VOC made via M6 (?) lugs.
Wifi built in
No Bluetooth on GX
Integrated 250/70 SmartSolar MPPT includes Bluetooth
Internal Topography
Images
