Differences

This shows you the differences between two versions of the page.

--- drafts:mppt_faq [2018-11-15 17:45] – [Q6: The Solar Charger is not working] guy_stewart
+++ drafts:mppt_faq [2021-09-30 07:18] (current) – guystewart
@@ Line 1: / Line 1: @@
 ====== MPPT FAQ ======
-See also [[victronconnect:mppt-solarchargers|]].
 ==== Q1: I want to size or oversize my PV array, how can I do this? ====
@@ Line 9: / Line 8: @@
 By default the RX pin is already used to control the battery life on/off selection with the jumper. Use VictronConnect to change the function of the RX pin to remote on/off to enable BMS control. See
-[[https://www.victronenergy.com/live/victronconnect:mppt-solarchargers#rx_port_function]] for details.
+[[https://www.victronenergy.com/media/pg/Manual_SmartSolar_MPPT_100-30__100-50/en/configuration-and-settings.html#UUID-b6cabb55-8d14-4fc9-190f-c0856aab60d3]] for details.
 ==== Q3: My MPPT is only showing voltage readings, not currents and also no Watts? ====
@@ Line 45: / Line 44: @@
 For example to charge a 12 Volt battery from a 24V battery bank?
-Yes.
+No.
 ==== Q8: Can I connect different panels to the same charge controller? ====
@@ Line 51: / Line 50: @@
 No. Under no circumstances.
-===== DISQUS Comments =====
+==== Q9: Can I use panels with optimisers? ====
+No.
+===== DISQUS =====
 ~~DISQUS~~