he "Without batteries" ESS mode only show on beta firmware
* Add extra settings needed for the Without bat... eature can be enabled
Lynx SmartBMS:
* Add firmware v1.09: (Including changes from v1.08 & v1.07)
... irect USB. Issue introduced in v6.10beta2
* Fix firmware update notification is not cleared after updating the firmware on remote connections.
* Correct the issue wher
: Allow technicians to use Remote VEConfigure and Firmware Update
=== 2024-06-26 ===
* Admin: Installation... ton for remotely accessing the EVCS settings.
* Firmware updates: Remove the ID column.
* Alarm rules: S... float alarms on PUT update
=== 2024-05-07 ===
* Firmware upgrade: Adjusted the table styling for updatable... error messages displayed in the red banners.
* Firmware update: Fix GX version warning
=== 2024-02-21 ===
======= Remote VE.Bus firmware updates =======
===== 1. Introduction and limitations =====
==== 1.1 Intro... ====
This feature allows remotely updating the firmware of Victron inverter as well as inverter/charger. ... keep your Victron equipment updated to the latest firmware version. Stable systems should be left with their current firmware. Firmware updates should only be done when it is
ase of problems, update all devices to the latest firmware. This includes the latest VE.Bus firmware and also the latest firmware in the [[venus-os:start|GX device]].
Firmware update instructions:
- [[updating_firmware:updating_ve.bu
you do see this error, then update to the latest firmware.
If you then still have the error, perform a res... . So when doing an update, it might look like the firmware update caused this issue; but it doesn't. The Sol... er RS and Multi RS products.
Please upgrade your firmware to at least v1.08 as the issues causing this error have been addressed.
If you are using firmware v1.08 or newer this error indicates that the inte
hat can be used for three things:
- Update the firmware of a VE.Can product connected via USB to your com... ASS030532000)
- (deprecated) Remotely updating firmware of a VE.Can product (requires an internet connect... s:start|GX device]]). Use the [[vrm_portal:remote-firmware-update|new mechanism]] instead.
- (deprecated) ... o not use VE Power Setup. Instead, use the remote firmware update feature (second option in above list) inst
====== Updating VE.Bus firmware, using VEFlash ======
===== VEFlash is deprecated in favour of VictronConne... o use, we now recommend to use VictronConnect for firmware updates. Instructions in the [[https://www.victro... attempted by system Owners and Users.**
Updating firmware on a VE.Bus product (Inverters, Multis and Quattr... guration.
These instructions are for the VEFlash firmware update method, it is also possible to update [[ht
rrors and descriptions.
Check [[#problems_during_firmware_updating|chapter 10.3]] of this manual for Troubleshooting firmware updates. When asking for help, make sure to alway... | D29 | Could not start updating, the firmware file is corrupt. |
| D31 | Updating f... | D33 | Could not start updating, the firmware file is not found. |
| D90 | Could no
====== VRM: Remote firmware update ======
===== 1. Introduction =====
This manual describes how to remotely update firmware. This functionality requires the device to be upd... top, tablet & phone
- No need to find the right firmware file: the system has all, and will clearly indica... tible products ====
Products ranges for which the firmware can be updated remotely:
Products connected via
B-Box Pro series batteries, the minimum supported firmware version for the [[venus-os:start|GX device]] is v... remium LV series, the minimum supported GX device firmware version is v2.52. It is recommended to use the latest firmware version on new installations and when trouble sho... models are compatible ===
The minimum supported firmware version is 469. Updating to the latest firmware i
multi as a Hub2 system. The following program and firmware versions are used:
| \\ VEConfigure 3 Rev. 90.04.169 \\ \\ ECOmulti firmware 2610304 \\ \\ Color Control GX rev. 1.14 \\ \\ |
... uring the ECOmulti and "VEFlash" for flashing the firmware. After installing, start the utilities with a wor... he MK2USB interfcae.
===== Check for a possible firmware upgrade =====
The ECOmulti will be delivered in
4.8 kwh | 5.12kWh | 3.55 kWh |
| Minimum Venus firmware | v2.40 | v2.20 | v2.20 | v2.20 | **imminent** | ... e system.
For new systems, the minimum required firmware version for the [[https://www.victronenergy.com/l... v2.42. It is highly recommended to use the latest firmware version on all connected devices, including the G... d inverter/chargers are compatible.
The minimum firmware version for new installations is 469. Though [[ht
tfs =====
__1. Your changes can be lost during a firmware update__
Changes made to the rootfs will be lost in case of a firmware update. The complete rootfs is overwitten during ... course it is always possible to disable automatic firmware updates. Also there is a data partition (/data), ... create a temporary root password.
Note that, for firmware version v2.00 and later, the root password will b
it. Sometimes you can go back by using the Backup firmware option. If that also contains a beta version, the... = How to join the program? ====
Go to Settings -> Firmware -> Online updates -> Update feed, and there selec... release//.
==== How can I install the latest beta firmware? ====
To install beta firmware online follow the instructions above in - //How can I join the program?//
ler and faster to use. Also it includes automatic firmware updates.
More information: [[victronconnect:mppt... First you will see an overview of charger model, firmware version and the actual settings, similar to that ... version 1.13. If you connect a model with recent firmware, this option will no longer be shown.
**f** - M... ** - Modify equalisation voltage
Available from firmware 1.16 and higher.
**j** - Modify auto equalise m