Differences

This shows you the differences between two versions of the page.

--- victronconnect:beta [2024-08-08 00:00] – [v6.07 (Released officially)] jperez
+++ victronconnect:beta [2024-09-24 10:05] (current) – [v6.09.1 (Released officially)] jperez
@@ Line 11: / Line 11: @@
 (Currently available betas are on top. See further below for official releases.)
-==== v6.10beta9 ====
+==== v6.10beta13 ====
-** 2024-08-02 **
+** 2024-09-11 **
 __Download links:__
   * iOS: Join TestFlight https://testflight.apple.com/join/cvufYMEh
-  * [[https://www.dropbox.com/scl/fi/dntjz8zsya56tqog21ezz/VictronConnect-v6.10beta9-arm64_v8a.apk?rlkey=pnv8o4ps9a8vf5ukrodxnmutg&dl=1|Android ARM64 ]]*
+  * [[https://www.dropbox.com/scl/fi/orkimz54x9yqjlmn8qap4/VictronConnect-v6.10beta13-arm64_v8a.apk?rlkey=vcs70vmwmf5viyic6sby4l0c3&dl=1|Android ARM64 ]]*
-  * [[https://www.dropbox.com/scl/fi/e501xqcabifyjhw4rvooc/VictronConnect-v6.10beta9-x86_64.apk?rlkey=pueupyrvdv2qnzc28tso07gvx&dl=1|Android x86_64]]*
+  * [[https://www.dropbox.com/scl/fi/6wtbh7husvp9mqi4gddjs/VictronConnect-v6.10beta13-x86_64.apk?rlkey=72vm1p627u9t1dk8993zib1hd&dl=1|Android x86_64]]*
   * [[https://www.dropbox.com/scl/fi/0rmcduskhe7khn9653zl1/VictronConnectInstaller.exe?rlkey=lekzlxmrexljgzg1o6opn72jm&dl=1|Windows 10 and higher]]
   * [[https://www.dropbox.com/scl/fi/up3ak71ao72q35goxez4c/VictronConnect.dmg?rlkey=jw97dvv4u8lzmut3gaa6dwyrw&dl=1|macOS 11 (Big Sur) and higher]]
@@ Line 27: / Line 27: @@
 Please report bugs and give feedback to these betas via the Disqus comments below. Please note that comments are not public by default, and first go to a moderation queue.
+__Changes__
+  * Add Korean translation
+Energy Meter:
+  * Add firmware v1.08:
+    * Hide L2-L3 line voltage in split phase configuration
+      * This was introduced in v1.07, which was only in VictronConnect beta.
+    * Improve VE.Can communication; this fixes the missing custom name
+Solar Chargers:
+  * Fix the issue where "Load output configuration" is not available as an RX port mode setting on certain models where it should be.
+==== v6.10beta12 ====
+** 2024-09-07 **
+__Changes__
+VE.Bus Inverter/Chargers:
+  * Fix error 122 when updating VE.Bus BMS V2 based systems
+  * Fix system configuration missing phase selection buttons
+SmartShunt:
+  * Add support for new models
+Lynx Smart BMS:
+  * Improve mode button visibility
+  * Fix maximum starter voltage value for BMV & SmartShunt demos
+==== v6.10beta11 ====
+** 2024-08-30 **
+__Changes__
+  * Restore the "VictronConnect" name on the splash screens
+Orion XS:
+  * Add firmware v1.05 update (mandatory)
+    * Improve non-volatile memory management by fixing a bug that could cause memory corruption when flashing the history or settings data. This is yet another improvement on top of what was done previously on v1.04.
+    * Fix operation time count when Orion XS is not charging (Off state)
+Energy Meter:
+  * Fix phase configuration setting (issue introduced in beta10)
+  * Energy counters renaming/rewording
+EVCS:
+  * Network settings rewording
+  * Add new settings
+GlobalLink:
+  * Add support for new model
+MultiHS
+  * Add ESS Settings (now similar to the InverterRS family)
+  * Removed the solar data section
+VE.Bus Inverter/Charger:
+  * Fix System configuration does not show Phase selection buttons
+Solar Chargers:
+  * Improve behaviour when scrolling solar history graphs.
+==== v6.10beta10 ====
+** 2024-08-09 **
+__Changes__
+Android: Fix firmware and settings files are not added to the library when opening from a file manager while VictronConnect is not already running
+GX products:
+  * Better handle local MQTT connection for Venus versions supportin secured profiles
+Energy Meter:
+  * Add firmware v1.07:
+    * Add line-to-line voltages
+    * Add neutral current
+    * Add split phase support (L1/L2)
+    * Add energy registration method
+      * Users can choose between vector (default), arithmetic and absolute
+    * Add roles for EV charger, heat pump, water pump and water heater
+    * Fix missing messages/responses in VE.Can communication
+    * Fix Ethernet state being invalid in VictronConnect
+**Below changes are already included in v6.08**
+Lynx SmartBMS:
+  * Add firmware v1.11
+    * Fix bug that prevented the device from automatically switching on after a low cell voltage. The Lynx BMS now switches on again when a charge voltage is detected on the system side. This bug was only in the NG versions.
+    * Add support for the "Pending" state in parallel mode that indicates on the GX that the BMS is waiting until the battery voltage is within a safe range to connect to the operational battery bank. The voltage displayed indicates the voltage at which it will connect.
+    * v1.10:
+      * Support for parallel BMS systems, which adds redundancy to a system. Detect other BMSs & optimize behavior for that case - implemented such that in case of no functional CAN-bus communication between the BMSs everything also works. No user setting is required for parallel support. Use in combination with Venus OS v3.40 or later, since that includes the new feature about combining the data into one total "virtual" bank + use that for DVCC. Paralleling is only possible for models with the same current rating. Combining Smart Lithium BMSs and Lithium-NG BMSs is allowed.
+      * Add 3 seconds delay to start-up procedure, for all system types, to detect parallel BMSs.
+      * Peukert adjusted to 1.02 and charge-efficiency to 99.5% for more accurate SoC calculation.
+VE.Bus Inverter/Chargers:
+  * VE.Bus firmware update: Fix error 123 when updating MultiPlus-II 48/3000/35-32 (already included in v6.08)
+  * Add firmware v552
+==== v6.10beta9 ====
+** 2024-08-02 **
 __Changes__
@@ Line 312: / Line 415: @@
   * Add Grid Code support. (Requires new firmware not available yet)
-==== v6.08 (Released officially) ====
+==== v6.09.1 (Released officially) ====
-** 2024-08-07 **
+** 2024-09-24 **
 __Download links:__
@@ Line 319: / Line 422: @@
   * iOS: [[https://itunes.apple.com/app/victronconnect/id943840744?mt=8|App Store]]
   * [[https://play.google.com/store/apps/details?id=com.victronenergy.victronconnect|Android]]
-  * [[http://updates.victronenergy.com/feeds/VictronConnect/windows/w10/VictronConnectInstaller.exe|Windows 10 and higher]]
   * macOS [[https://itunes.apple.com/app/victronconnect/id1084677271?mt=12|11 (macOS Big Sur) and higher|App Store]]
-  * [[https://www.victronenergy.com/upload/software/VictronConnect-x86_64-v6.08.AppImage|Linux AppImage]]
+  * [[https://www.victronenergy.com/upload/software/VictronConnect-x86_64-v6.09.1.AppImage|Linux AppImage]]
-  *
 * Android: If you can't open the downloaded file from the downloads list try using a file browser.
+__Changes__
+Phoenix Smart Inverters:
+  * Fix Bluetooth firmware update problem for a recently shipped batch of Phoenix Smart Inverters. Note that this change unfortunately disables the Settings Lock feature. A new update that re-adds Settings Lock for the Phoenix Smart Inverters is expected soon.
+==== v6.09 (Released officially) ====
+** 2024-09-10 **
+__Changes__
+VE.Bus Inverter/Chargers:
+  * Fix error 122 when updating VE.Bus BMS V2 based systems
+  * Fix system configuration missing phase selection buttons
+SmartShunt:
+  * Add support for new models
+Orion XS:
+  * Add firmware v1.05 update (mandatory)
+    * Improve non-volatile memory management by fixing a bug that could cause memory corruption when flashing the history or settings data. This is yet another improvement on top of what was done previously on v1.04.
+    * Fix operation time count when Orion XS is not charging (Off state)
+Solar Chargers:
+  * Add firmware v3.16:
+    * Fix bug on synchronize charging over CAN when two or more MPPTs are connected. In some rare situations this could potentially cause the charger to jump absorption.
+  * Improve behaviour when scrolling 30 day history bar graph
+Energy Meter:
+  * Fix voltage between PE and Neutral is not shown.
+==== v6.08 (Released officially) ====
+** 2024-08-07 **
 __Changes__
@@ Line 411: / Line 548: @@
   * Add settings lock exceptions
+SmartShunt:
+  * Add support for SmartShunt 300A model
 ==== v6.05 (Released officially) ====
 ** 2023-04-25 **