Skip to main content

Blue Smart IP22 Charger

Reset to defaults

If needed, it is possible to reset/restore all Blue Smart IP22 Charger settings to factory defaults.

Note that this does not reset any Bluetooth related settings, such as the PIN code or pairing information.

Settings can be reset/restored to factory defaults using a Bluetooth enabled device (such as a mobile phone or tablet) with the VictronConnect app.

To perform a system reset:

  1. Connect the AC power cable to a mains power outlet; after a short delay, the LEDs indicating the current charge mode and charge state will illuminate.

  2. Using a Bluetooth enabled device (such as a mobile phone or tablet), open the VictronConnect app and locate the Blue Smart IP22 Charger in the 'LOCAL' page device list, then connect to the device (default Bluetooth PIN code is 000000).

  3. Select the ‘Setting’ icon (gear in the top right corner) to access the 'Settings' page.

    VictronConnect_-_Settings_-_BSC_IP22.jpg
  4. Select the 'device options' icon (three vertical dots in the top right corner) to access the ‘device options’ menu.

    VictronConnect_-_Settings_options.jpg
  5. Select 'Reset to defaults' to open the 'Restore device?' window.

    VictronConnect_-_Device_options__Reset_to_defaults_.jpg
  6. Select ‘YES’ to reset/restore all settings to factory defaults.

    VictronConnect_-_Restore_device.jpg