1. Introduction
In this section:
The Victron EM24 RS485 is a standard device to measure the power and energy of a 3-phase application.
Its data will be displayed on a GX device and our VRM portal.
1.1. Features
The EM24 RS485 can be configured for four different roles in a GX device such as the Cerbo GX:
As a Grid meter and used as control input for an ESS System.
To measure the output of a PV Inverter.
To measure the output of a AC Genset.
As an AC meter to measure a dedicated AC load circuit.
It offers two options for connection to a GX device:
A wired connection, either by using the RS485 to USB interface with 1.8m or 5m cable length.
A wireless connection via our Zigbee to USB and Zigbee to RS485 converter.