System with Smart Battery Sense
Refer to the wiring schematic below to connect a Blue Smart IP22 Charger (1 output model) to a single battery / battery bank, with a Smart Battery Sense in the system:
Key | Description |
|---|---|
A | AC power supply (mains power grid, generator or inverter) |
B | Blue Smart IP22 Charger (1 output model) |
C | Fuse / circuit breaker (locate as close as practical to battery) |
D | Smart Battery Sense |
E | Battery / battery bank |
Notice
A VE.Smart Network must be setup between the Blue Smart IP22 Charger and Smart Battery Sense to enable Bluetooth connectivity and communication between devices; refer to the 'Advanced Configuration > VE.Smart Networking’ section for more information.
Refer to the wiring schematic below to connect a Blue Smart IP22 Charger (3 output model) to multiple independent batteries / battery banks, with a Smart Battery Sense in the system:
Key | Description |
|---|---|
A | AC power supply (mains power grid, generator or inverter) |
B | Blue Smart IP22 Charger (3 output model) |
C | DC negative busbar |
D | Fuses / circuit breakers x3 (locate as close as practical to batteries) |
E | Smart Battery Sense |
F | Batteries / battery banks x3 (any combination of 1, 2 or 3 batteries) |
Notice
A VE.Smart Network must be setup between the Blue Smart IP22 Charger and Smart Battery Sense to enable Bluetooth connectivity and communication between devices; refer to the 'Advanced Configuration > VE.Smart Networking’ section for more information.