Skip to main content

Blue Smart IP65 Charger

Resetting the PIN code

If the PIN code is forgotten/lost or does not work, it can be reset to 000000 (not the default PIN code stated on the label) using the MODE button on the charger or a Bluetooth enabled device (mobile phone or tablet) with the VictronConnect app.

Reset PIN using the charger

To reset the Bluetooth PIN code:

  1. Connect the Blue Smart IP65 Charger AC power cable to a mains power outlet; after a short delay the TEST LED will begin to blink, until the charger determines if the battery will successfully accept charge (for up to 2 minutes).

    Image_-_LED_Charge_State_and_Mode_-_BSC_IP65.png

  2. Depress and hold down the MODE button on the Blue Smart IP65 Charger for 10 seconds.

    Image_-_Mode_button_-_BSC_IP65.png

  3. After 10 seconds have elapsed all charge mode LEDs will blink twice to indicate that the Bluetooth PIN code has been successfully reset.

    Image_-_LED_Charge_Mode_-_BSC_IP65.png

  4. The Bluetooth PIN code has now been reset to 000000.

Notice

During this procedure:

  1. The Bluetooth PIN code is reset to 000000 (not the default PIN code stated on the label)

  2. Bluetooth pairing information is cleared

Accordingly it is necessary to unpair all devices (mobile phones or tablets) previously paired with the Blue Smart IP65 Charger and establish a new Bluetooth pairing.

Reset PIN using VictronConnect

To reset the Bluetooth PIN code:

  1. Locate the PUK code stated on a label located on the back of the charger and record it for use later.

  2. Connect the Blue Smart IP65 Charger AC power cable to a mains power outlet; after a short delay the TEST LED will begin to blink, until the charger determines if the battery will successfully accept charge (for up to 2 minutes).

    Image_-_LED_Charge_State_and_Mode_-_BSC_IP65.png

  3. Using a Bluetooth enabled device (mobile phone or tablet), open the VictronConnect app and locate the Blue Smart IP65 Charger in the Device list Local page.

    VictronConnect_-_Device_list__My_devices__-_BSC_IP65.jpg

  4. Select the Device options icon (three vertical dots on the right side of the description) to access the dropdown menu.

    VictronConnect_-_Device_list__Device_options__-_BSC_IP65.jpg

  5. Select Reset PIN code from the dropdown menu to open the Reset PIN code pop-up dialog box.

    VictronConnect_-_Device_list__Reset_PIN_code__-_BSC_IP65.jpg

  6. Enter the PUK code (recorded earlier) and select OK.

    VictronConnect_-_Reset_PIN_code__PUK_code__-_BSC_IP65.jpg

  7. A pop-up dialog box with the text "Busy" will be displayed while the Bluetooth PIN code is being reset.

    VictronConnect_-_Reset_PIN_code__Busy__-_BSC_IP65.jpg

  8. After a short delay a pop-up dialog box will appear confirming that the Bluetooth PIN code has been successfully reset; select OK to exit into the VictronConnect Device list LOCAL page.

    VictronConnect_-_Reset_PIN_code__Confirmation__-_BSC_IP65.jpg

  9. The Bluetooth PIN code has now been reset to 000000.

Notice

During this procedure:

  1. The Bluetooth PIN code is reset to 000000 (not the default PIN code stated on the label)

  2. Bluetooth pairing information is not cleared

Accordingly Bluetooth pairing with the device (mobile phone or tablet) used to reset the PIN code is unaffected, however it is necessary to unpair any other devices (mobile phones or tablets) previously paired with the Blue Smart IP65 Charger and establish a new Bluetooth pairing.