Re-enabling Bluetooth
It is possible to re-enable Bluetooth communication using the MODE button on the charger.
To re-enable Bluetooth:
Connect the AC power cable to a mains power outlet; after a short delay, the LEDs indicating the current charge mode and charge state will illuminate.
Depress and hold the MODE button on the Blue Smart IP22 Charger for 10 seconds.
All charge mode LEDs will blink twice to indicate that Bluetooth has been successfully re-enabled, and all Bluetooth settings reset.
Notice
During this procedure:
Bluetooth is re-enabled
The PIN code is reset to default (000000)
All Bluetooth pairing information is cleared
Accordingly, it’s also necessary to remove/clear the Blue Smart IP22 Charger Bluetooth pairing information from any Bluetooth enabled devices (mobile phones or tablets) that were previously paired before attempting to re-connect.